PRO2

HDC6L

New

$110.88

PRO2

Add to wishlist

ETA
10-SEP-2020

{tab Features}

Solid/FTP CAT5/6 cable required for best results

If you are running a cable 15 metres or more, make sure you use a SOLID CAT5/6 cable. This product may not workwith standard stranded ethernet cable. See related items forcabling that will work this product. 60m distance has been tested fine on F/UTP solid cat6 cable.

FYI: Most of the pre-made cat5/6 leads on the market are stranded cable not solid.

An upgraded version of our HDC6EDID. Now with local HDMI loop out on transmitter device enables local viewing function. Which means you can view the video source locally as well as on the extended end.

A neat and simple high definition HDMI extender kit. This kit extends your high definition AV sources from Blu-ray DVD Players, PS3 and XBOX etc. up to a maximum 50m via single solid CAT5E/ 6 cables through the wall cavities. The new EDID feature increases its compatiblilty with players or displays. It supports full 1080P high definition and integrates an infra-red control extender for full controllability from the receiving end. RJ45 connections on the rear of both units make it for easy connection.

Foxtel iQ2and iQ3 compatible

Features

  • Transmits HDMI Audio/Video Signals and IR over a 50m single solid Cat5e/6 Cable.
  • Transmits a wide-band Bi-Directional IR control signal together with the HDMI signal.
  • Supports 24bit Deep Colour.
  • Full cascade to create larger distributions.
  • Automatically adjusts feedback, equalization and amplification
  • Supports PCM ,Dolby Digital, and DTS Digital Surround
  • Follows IEEE-568B cable termination standards and solid cables are prefered.
  • HDCP compliant
  • Supports 3D video format
  • HDMI out port on transmitter
Got the right cable?

Please note: IEEE-568B standard solid cables are recommended for this kit.

Wiring Diagram

{tab Specifications}

What are included in the package?

  • 1xHDMI Transmitter
  • 1xHDMI Receiver
  • 2 x IR TX Emitter
  • 2 x IR RX Receiver
  • 2 x 5V/ 1A DC Adapter (Australian approval)
  • User Manual

Specifications

Transmission Distance1080p up to 50m*
Operating Temperature Range−5 to +35°C
Operating Humidity Range5 to 90% RH (No Condensation)
Data transfer speed6.75Gbps
ConnectorsHDMI Receptacle x 2
RJ45 Receptacle x 2
Power DC Receptacle x 2
3.5mm stereo Receptacle x 2(for IR TX and RX cable)
Resolution outputs1080p/1080i/720p/576p/480p/576i/480i
Video colour bit supported24bit
Audio format supportedDTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video SignalHDMI + HDCP
Dimensions (HxWxD)65 x 24.1 x 85mm
Power supply5V DC Power supply (Included)
Power consumption1.5W(MAX) (TX:0.5W,RX:0.3W)
Net Weight319g
IR wavelength & frequencyWavelength: 940nm IR Frequency: 38KHz - 56KHz

*Note: 50m distance is under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.

{tab FAQ}
Does this unit work with the new Foxtel iQ3?
Yes. Just make sure your IR emitter is placed in the correct location. See the image below.

Also note that the new Foxtel IQ boxes only come with a Bluetooth remote. You will need to acquire a Foxtel compatible IR remote.

What happen if the product is not working?
Please check your cable. Make sure IEEE-568B type solid cable is being used.
{/tabs}

30 other products in the same category: