NIDAC

CT1

New

$46.82

NIDAC

Add to wishlist

3 IN
MELBOURNE WAREHOUSE
3 Items in Stock

Warning: Last items in stock!

GENERAL PURPOSE DC TIMER

The Nidac CT1 Series 3 Control Timer has 13 different operating modes and 4 timing ranges, 3 trigger modes, dualDC voltage opperation & a heavy duty relay output.

FEATURES:

  • 12 to 24V DC operation
  • 13 operating modes:
    • single shot (normal timer)
    • single shot retriggerable
    • dual edge
    • dual edge retriggerable
    • bistable (clutch) operation
    • trigger extension
    • maximum pulse
    • minimum pulse
    • hold off (door open too long)
    • multivibrator, 1 sec on time
    • multivibrator, equal on/off time
    • delay on
    • delay on retriggerable (no activity timer) 
  • 4 timing ranges:
    • 1 to 255 seconds in 1 second increments
    • 10 seconds to 42 minutes in 10 second increments
    • 1 to 255 minutes in 1 minute increments
    • 1 hour to 255 hours in 1 hour increments
  • Accurate DIP switch selection for timing
  • Selectable positive, negative or dual edge trigger
  • only 70 x 57 x 23.5mm including feet
  • 70 x 45 x 19.5mm without feet
  • LED indicates operation
  • Sturdy self adhesive feet
  • Heavy duty 5 Amp changeover relay contacts
  • Fail safe or fail secure operation
  • LED indication of relay operation
  • 36 month warranty

SPECIFICATIONS:

  • Size: 45mm x 70mm x 19.5mm (without feet)
  • 57mm x 70mm x 23.5mm (with feet)
  • Operating Voltage: 10.5 - 28 Volts D.C.
  • Quiescent Current:
    • 10 mA. @ 12 Volts D.C. - (40 mA. with relay on).
    • 11 mA. @ 24 Volts D.C. - (45 mA. with relay on).
  • High Trigger Voltage: > 2 Volts D.C.
  • Low Trigger Voltage: < 1.5 Volts D.C.
  • Trigger Current:
    • -0.03 mA. @ 0 Volts D.C.
    • 0.9 mA. @ 12 Volts D.C.
    • 2.1 mA. @ 24 Volts D.C.
  • Relay
    • Maximum Switching Current: 5 Amps.
    • Maximum Switching Voltage: 30 VDC, 125 VAC.
  • WARNING: DO NOT USE 240V ON THE RELAY CONTACTS!

30 other products in the same category: