Add to wishlist

By buying this product you can collect up to 38 loyalty points. Your cart will total 38 points that can be converted into a voucher of $7.60.

  • Waterproof handheld Infrared Thermometer
  • Safe even if getting wet
  • Dustproof and waterproof - IP67
  • Possible to wash
  • Please feel secure to use the product on the spot, made from ABS resin of antibacterial specification.
  • Shock-proof structure: No damage even if dropped fromthe height of 1m.
  • With auto-power-off function, preventing consumption of the battery
  • Wide Temperature Range of -40ºC to 300ºC
  • Small and light: Possible to measure easily by one hand.
  • Portable type: Convenient to carry
Measuring Range -40ºC ~ 300ºC
Display Resolution
0.5ºC . 1ºC for below -20ºC and over 100ºC
Measuring Accuracy When the ambient temperature is 25 ±2ºC and the emissivity (e) is 1,
0 ~ 300ºC: bigger value of either of ±1% of the
measured value ±1dgt or ±2ºC ±1dgt.
0 ~ -30ºC: d>
below -30ºC: d>
Repeatability within 1ºC ±1dgt
Response 1 sec (90% response)
Measuring Diameter (45mm/500mm(Optical sensitivity: 90%)
Collimation Before shipment: 0.95. The value can be altered between 0.8and 1.0 with the slide switch at the lower part of the battery compartment
(by 0.05 steps).
Laser beam (650nm 1mW JIS class2) specifies the center.
Water-Proof Property IP67
Auto Power Off If no key is pressed for 30 seconds, the power is shut off automatically.
Shock Proof Property This instrument or its function/performance will not be damaged even if it is dropped on the p tile floor from 1 meter high.
Operating Temperature 0 ~ 50ºC
Operating Humidity 90% rH and below (no condensation)
Storage Temperature -20 ~ 55ºC (no condensation)
(Note): In the case of longterm storage, the batteries should be removed.
Battery 2 AAA alkaline cell batteries
Battery Life Approximately 10 hours for continuous use
Housing material ABS (antibacterial)
Dimension 120 × 60 × 54mm (Maximum value for each direction)
Weight Approx. 123g
Accessories 2 AAA Alkaline Cell Batteries
Instruction Manual
Approved Standard CE marking: EMI EN61326 Class B, EMS EN61326 Annex C
Stability:±5ºC under EMC test environment at 25ºC
30 other products in the same category: